Leather Chest Harness [Suede-Lined]

Overview

The Leather Chest Harness is built as a fitted leather body harness with multiple fixed attachment points.

Each strap segment is suede lined and joined into the harness structure with riveted construction and solid cast hardware.

Nine O-rings distribute connection points across the chest harness, while four buckle closures adjust the fit at the body.

Materials & Build

Outer Structure
Hand-dyed 8/9 oz full grain leather forms the strap structure of the harness.

Contact Layer
Each harness segment is lined with suede leather where it contacts the body.

Hardware
Solid cast hardware is used for the O-ring attachment points and buckle closures.

Construction
The harness uses riveted construction. Each segment is permanently attached to multiple O-rings to create a fixed chest-mounted attachment layout.

Care Instructions

Wipe the leather strap outer with a damp cloth as needed, then buff with a soft dry cloth and allow it to air-dry fully.

Dry brush the suede lining to remove dirt and debris. Do not wet the suede lining or use cleaner or detergent on it.

Sizing & Dimensions

Sizing
Choose the closest size range or select custom sizing and add measurements in the order notes.

Natural Waist
Measure around the waist at the smallest point, typically just above the belly button.

Custom: add measurement in notes
XS = 22"–24"
S = 25"–27"
M = 28"–30"
L = 31"–33"
XL = 34"–36"
XXL = 37"–39"

Underbust
Keeping the tape measure parallel to the floor, measure around the chest just under the breast cup.

Custom: add measurement in notes
XS = 28"–30"
S = 31"–33"
M = 34"–36"
L = 37"–39"
XL = 40"–42"

Dimensions
The harness uses 5/8" wide strapping.

Fit
Use custom sizing when the natural waist and underbust measurements do not fall cleanly into the same standard size range.

How It Works

The harness sits around the chest and waist, with buckle closures used to adjust the fit against the body.

The nine O-ring attachment points are permanently built into the harness structure. This creates multiple fixed connection points across the harness instead of relying on one central attachment.

Select sizing from both natural waist and underbust measurements. If the two measurements fall into different size ranges, use custom sizing and provide both measurements in the order notes.